{
“@context”:”https://schema.org/”,
“@type”:”Product”,
“name”:”EP-JB-1200 Vacuum Meat Mixer Machine”,
“description”:”1200 L capacity industrial vacuum meat mixer with twin 7.5 kW motors, reinforced dual-bearing shafts and all-SUS304 stainless steel construction for high-volume industrial meat processing.”,
“brand”:{“@type”:”Brand”,”name”:”Ever Power”},
“offers”:{“@type”:”Offer”,”priceCurrency”:”USD”,”availability”:”https://schema.org/InStock”}
}

EP-JB-1200 Vacuum Meat Mixer — Industrial-Scale Mixing Power for High-Volume Facilities

In a high-volume meat-processing operation, the mixing step must never throttle the production line. The EP-JB-1200 vacuum meat mixer is engineered precisely to eliminate that bottleneck: a 1,200-litre sealed hopper driven by twin 7.5 kW motors — 16.1 kW of installed drive power in total — delivers approximately 960 kg of homogenised, vacuum-processed product per batch, enough to supply two downstream vacuum filling machines simultaneously without interruption.

The EP-JB-1200 inherits the proven dual-shaft elliptical spiral paddle architecture from the smaller JB-series models, but every structural element is scaled and reinforced for the load demands of a 1,200-litre working volume. The main shaft housings carry reinforced dual-bearing assemblies that distribute the radial and axial forces generated by a fully charged 960 kg batch across two contact points per shaft, significantly extending fatigue life under three-shift continuous operation.

Ever Power subjects every EP-JB-1200 to a mandatory 8-hour full-load factory acceptance test at rated vacuum level and maximum speed before the machine leaves our facility. The test record accompanies each machine as part of the documentation package.

Product Gallery

Vacuum meat mixer control panel and hopper

Vacuum meat mixer discharge and paddle detail

Technical Specifications

Parameter	EP-JB-1200 Value
Model	EP-JB-1200
Hopper Capacity	1,200 L
Agitation Speed	84 / 42 r/min (high / low)
Motor Power	7.5 × 2 + 1.1 kW (16.1 kW total)
Overall Dimension (L × W × H)	2,100 × 1,460 × 2,000 mm
Machine Weight	1,100 kg
Contact Material	SUS304 Stainless Steel
Control Panel Protection	IP65 Waterproof
Drive System	Heavy-Duty Chain Drive, Reinforced Dual Bearing
Standard Voltage	380 V / 50 Hz (customisable)
Estimated Batch Yield	≈ 960 kg finished product
Recommended Floor Load Capacity	≥ 1.5 t/m²

JB-Series Model Comparison — Find Your Capacity

Specification	EP-JB-300	EP-JB-650	EP-JB-1200 ◀
Hopper Capacity	300 L	650 L	1,200 L
Motor Power	2.4×2+1.1 kW	4.5×2+1.1 kW	7.5×2+1.1 kW
Batch Yield	≈ 240 kg	≈ 520 kg	≈ 960 kg
Daily Output (3 shifts)	≈ 720 kg	≈ 1,500 kg	≈ 2,880 kg+
Machine Weight	400 kg	700 kg	1,100 kg
Target Scale	Small / multi-SKU	Mid-scale / standard line	Large / multi-line supply

Six Engineering Capabilities That Define the EP-JB-1200

① Full-Coverage Spiral Paddles in a 1,200-Litre Vessel

The EP-JB-1200 paddles are dimensioned to cover the full hopper cross-section including the corners of the elongated 2,100 mm vessel, ensuring every kilogram receives active mixing forces on every revolution. This eliminates the dead-zone accumulation that afflicts under-powered paddle systems when vessel length exceeds 1,800 mm.

② Twin 7.5 kW Motors with Torque Reserve for Dense Loads

Each shaft is driven by a dedicated 7.5 kW motor, delivering peak torque at start-up sufficient to overcome the inertia of a fully loaded 960 kg batch — including high-fat or high-connective-tissue blends. The 1.1 kW auxiliary motor serves the vacuum pump independently, keeping vacuum level stable during the power-intensive mixing phases.

③ Reinforced Dual-Bearing Shafts for Three-Shift Durability

The EP-JB-1200 uses reinforced dual-bearing assemblies on both shafts — each bearing pair sized to share load symmetrically and independently. Bearing fatigue life at rated load is calculated for a minimum of 20,000 operating hours, equivalent to approximately five years of three-shift operation.

④ Multi-Line Supply Architecture

The discharge spout geometry and hopper tilt angle of the EP-JB-1200 are designed to supply two EP-ZKG-6500 vacuum filling machines simultaneously via a Y-split receiving trolley, effectively doubling filling-line utilisation while maintaining a single centralised mixing point.

⑤ SUS304 Steel Specified for High-Frequency Wash-Down

The gauge and grade of stainless steel in the EP-JB-1200 hopper shell, paddle arms and lid framework are specified for elevated cleaning exposure. All welds are continuous, crevice-free and finished smooth on internal food-contact faces to prevent product residue adhesion and support rapid hygiene audit inspection.

⑥ Mandatory 8-Hour Factory Acceptance Test

No EP-JB-1200 leaves the Ever Power facility without completing a full 8-hour acceptance test under representative load and vacuum conditions. Motor temperatures, vibration levels, vacuum decay rate, and discharge alignment are measured and recorded. The test report is provided with the machine and serves as the baseline for warranty claims.

Reinforced Paddle and Shaft Structure

EP-JB-1200 reinforced dual-shaft spiral paddle blades for 1200L industrial vacuum mixing

At 1,200-litre working volume, paddle blade proportions and shaft-bearing sizing are re-engineered from the smaller JB-series models. The result is a structurally independent design rated for the continuous load conditions of a three-shift industrial facility.

Industrial Mixing Cycle — EP-JB-1200 in a Three-Shift Operation

Phase	Action	Duration	Industrial Note
1 — Load	Forklift or conveyor charges hopper	4–6 min	Loading infrastructure required; machine must be anchored
2 — Evacuate	Vacuum pump reduces chamber to −0.08 MPa	3–4 min	Larger chamber requires proportionally larger pump — included as standard
3 — Pre-mix	84 r/min — both shafts at full torque	6–10 min	Twin 7.5 kW motors sustain speed under 960 kg inertia load
4 — Homogenise	42 r/min — controlled protein binding	15–22 min	Axial return current covers full 2,100 mm vessel length
5 — Discharge	Tilt hopper, split to two receiving trolleys	4–6 min	Y-split trolley enables simultaneous dual-filler supply

Total cycle: approximately 32–48 minutes. Three batches per eight-hour shift = 2,880 kg shift output.

High-Volume Applications Suited to the EP-JB-1200

High-volume industrial meat processing facility using EP-JB-1200 large capacity vacuum mixer
Industrial sausage production line supplied by EP-JB-1200 vacuum meat mixer

Industrial Sausage Facilities Supplying Retail Chains

Supermarket-supply contracts demand batch-to-batch colour and texture consistency that open-air mixing cannot deliver at industrial scale. The EP-JB-1200 produces a documented, repeatable vacuum-mix cycle that quality auditors can verify against the factory acceptance test record.

Luncheon Meat and Canned Meat Production

Large-volume luncheon meat lines require consistent emulsion texture at 800–1,000 kg per batch. The EP-JB-1200 handles dense, viscous emulsions used in canned-meat applications without speed drop or thermal stress on the drive train.

OEM Meat Suppliers to Food Service Groups

Facilities that supply branded or private-label meat to QSR chains or catering groups need mixing equipment capable of handling multiple 24-hour production runs without unplanned downtime. The EP-JB-1200 reinforced bearing specification and acceptance-tested drive train support this demand profile.

High-Throughput Halal Processing Factories

Halal export-focused facilities requiring equipment that can be audited for material composition. The EP-JB-1200 documented all-SUS304 construction and absence of copper or brass in food-contact zones supports this audit pathway at industrial scale.

To design a complete high-volume production line incorporating the EP-JB-1200, visit our equipment range page or contact our applications team directly.

Upstream and Downstream Equipment for the EP-JB-1200

EP-ZKG-6500 Vacuum Filling Machine (× 2)

One EP-JB-1200 batch can supply two EP-ZKG-6500 fillers simultaneously via split-discharge, doubling filling-line utilisation without adding a second mixer.

EP-YS-231 Brine Injection Machine (231-Needle)

The 231-needle configuration of the EP-YS-231 pre-treats large meat blocks at the throughput rate required to keep the EP-JB-1200 continuously loaded across a three-shift production day.

EP-YZG-1200 Sausage Linking & Hanging Line

Running at 1,200 portions per minute, the EP-YZG-1200 matches the batch throughput generated by the EP-JB-1200 and two EP-ZKG-6500 fillers operating in parallel, completing the industrial-scale production cell.

Customer Case Studies — EP-JB-1200 at Scale

POLAND — Industrial Pork Sausage Group, Poznan Region

Application: Private-label pork frankfurter and smoked sausage for three national retail customers, three-shift operation, target 7,000 kg daily output.

Challenge: Two 650-litre mixers created a scheduling conflict — when one machine was in cleaning cycle, the second could not supply both fillers simultaneously, causing periodic idle time that reduced daily output by 12–15 %.

Outcome: A single EP-JB-1200 replaced both 650-litre machines and supplies two fillers from a split-discharge arrangement. Floor space freed by removing the second mixer was used to add a third filling line. Daily output increased from 6,200 kg to 8,400 kg on the same staffing level.

“We replaced two machines with one and gained a third filler position in the space that freed up. The EP-JB-1200 changed our production architecture entirely.” — Operations Director

★★★★★

SAUDI ARABIA — Halal Beef and Lamb Facility, Riyadh

Application: Halal certified beef merguez, lamb kofta and chicken shawarma mix — five SKUs, continuous three-shift operation during Ramadan peak period.

Challenge: Ramadan demand required trebling output for six weeks. Previous imported mixers had brass discharge-valve components creating non-conformances under a new third-party halal auditor, risking supply disruption to a major retail customer.

Outcome: The EP-JB-1200 arrived with full SUS304 material certificates for all food-contact components. The halal audit passed without non-conformances. The machine delivered the required weekly output during the Ramadan peak running three shifts.

“This was a critical situation and Ever Power delivered on time and to specification. The material documentation was exactly what our auditor required.” — Supply Chain Manager

★★★★★

BRAZIL — Luncheon Meat and Canned Sausage Manufacturer, Paraná State

Application: Canned luncheon meat and canned Vienna sausage — continuous production for domestic retail and export.

Challenge: Canned meat emulsions at 30–35 % fat content caused the previous 800-litre atmospheric mixer to trip its thermal overload protection repeatedly in the first 90 seconds of each batch, adding 8–12 minutes of unplanned downtime per batch.

Outcome: The twin 7.5 kW motors of the EP-JB-1200 provided sufficient torque to start consistently under full high-fat load without thermal trips. Zero motor overload events were recorded in the first 1,000 operating hours. Batch throughput stabilised at 2.5 batches per shift, matching downstream retort capacity for the first time.

“No more manual restarts. The machine starts every time, on every batch, regardless of how cold the meat is from the chillers.” — Maintenance Supervisor

★★★★☆

Frequently Asked Questions — EP-JB-1200

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What electrical infrastructure does the EP-JB-1200 require?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Total installed load is approximately 16.1 kW. A dedicated three-phase supply rated at minimum 25 A per phase is recommended. Standard voltage is 380 V / 50 Hz; other voltages available on request.”}},{“@type”:”Question”,”name”:”Can the EP-JB-1200 supply two filling machines simultaneously?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Yes. The discharge spout geometry supports a Y-split receiving trolley that divides each 960 kg batch between two filling-machine hoppers without the mixer pausing between transfers.”}},{“@type”:”Question”,”name”:”What floor preparation is needed before installing the EP-JB-1200?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”A concrete floor rated for minimum 1.5 t/m² load capacity is required. No foundation pit is necessary. The machine is moved by forklift and secured with anchor bolts. Installation drawings are provided with every order.”}},{“@type”:”Question”,”name”:”How does the EP-JB-1200 handle cleaning in a three-shift operation?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”All internal food-contact welds are continuous and ground smooth. The IP65-rated panels can be sprayed directly. A full wash-down and product changeover typically requires 20-25 minutes.”}},{“@type”:”Question”,”name”:”What is included in the EP-JB-1200 warranty and documentation package?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Included: one-year full-machine warranty, 8-hour factory acceptance test report, SUS304 material certificates for all food-contact components, multilingual installation guide, and a quick-wear spare-parts kit. Remote video commissioning support is included for all export orders.”}}]}

What electrical infrastructure does the EP-JB-1200 require?

Total installed load is approximately 16.1 kW. A dedicated three-phase supply rated at minimum 25 A per phase is recommended. Standard voltage is 380 V / 50 Hz; other voltages available on request. Confirm available switchgear capacity with your electrician before ordering.

Can the EP-JB-1200 supply two filling machines simultaneously?

Yes. The discharge spout geometry and hopper tilt angle support a Y-split receiving trolley that divides each 960 kg batch between two filling-machine hoppers without the mixer pausing. Contact our team for the recommended trolley specification and discharge interface dimensions.

What floor preparation is needed before installing the EP-JB-1200?

A concrete floor rated for minimum 1.5 t/m² load capacity is required. No foundation pit or isolation base is necessary. The machine is moved into position by forklift and secured with anchor bolts through the base frame. Installation drawings are provided with every order.

How does the EP-JB-1200 handle cleaning in a three-shift operation?

All internal food-contact welds are continuous and ground smooth to eliminate crevices. The IP65-rated control panel and drive enclosures can be sprayed directly with water. A full wash-down and product changeover typically requires 20–25 minutes.

What is included in the EP-JB-1200 warranty and documentation package?

Included: one-year full-machine warranty, 8-hour factory acceptance test report, SUS304 material certificates for all food-contact components, multilingual installation and commissioning guide, and a quick-wear spare-parts kit. Remote video commissioning support is included for all export orders.

Scale Your Mixing Capacity Without Scaling Your Headcount

Share your shift pattern, daily output target, raw material specifications and downstream equipment details. Our industrial applications team will verify fit, confirm electrical requirements and provide a complete commercial quotation including freight to your port.

Request a Quote for the EP-JB-1200 →

1200L industrial meat mixer

EP-JB-1200 Vakuumköttblandare